Application of Oil Mist Cooling System

Traditional cooling systems are difficult to achieve precise control, and cannot meet the requirements of trace, uniform, continuous, and precise supply, which consumes a lot of resources. The oil mist cooling system perfectly solves this series of problems, and truly realizes cost control and resource saving.Oil mist cooling system mainly includes oil mist storage, spray valve and oil pipe,usually used for cooling tools when processing aluminum and aluminum-plastic panels.

Main principle: The oil mist storage is connected to the spray valve through the oil pipe, and the spray valve is provided with a compressed air channel, and the compressed air atomizes the coolant. The cutting fluid atomized by compressed air is supplied to the tool, and then cooled through the oil pipe. The gas mist is more permeable than the liquid and plays a greater role. The heat dissipation method is vaporization, which absorbs more heat and lowers the cutting temperature.

The oil mist cooling system is easy to install, which greatly saves time and cost. The cooling and lubrication are realized simultaneously during use. The tool will not cause cracks due to uneven cooling, and the production efficiency can be increased by 20%-30%. The service life of the tool It can also be increased by more than 50%.